Fork Horizontal Control (Optional)
When the fork is working, it can be kept at the horizontal position, easy for loading or unloading goods. The working efficiency is greatly improved.
Speed Control Function (Optional)
The mast’s tilt speed and forklift’s travel speed will be controlled when the mast is at high goods allocation, improving the operation security.
Fork Lockup Function (Optional)
Whether the starting switch is on or off, the fork will be locked when the driver is not on the seat, so that the mistaken operation is avoided.
If the driver leaves the seat during traveling or in the case of incorrect sitting position, the forklift will automatically stop unloading or traveling.
Steering Synchronization System (Optional)
The steering synchronization ensures smooth steering and easier operation.
Speed Control at Sharp Turn (Optional)
The traveling speed will be automatically controlled in the case of sharp turn, and the steering device is locked.
Automatic Load Measurement (Optional)
The lifting system will automatically measure the load, if the measured load exceeds the rated load, it will give an alarm.
High Strength and Overall Pressing Canopy Guard
The canopy guard applies overall pressing and the front/rear column applies irregular section steel. The integrated intensity is strengthened and the forklift looks more beautiful.
Cushion Control Function-lift (Optional)
When the fork drops to the ground or rises to the top, the cushion device will effectively prevent the service wear.
Cushion Control Function-descent (Optional)
When the fork drops to the ground, the cushion device will effectively prevent the service wear.
Neutral Gear Locking
Start the forklift only when it keeps in the neutral position.
Safety Indication Lamps
Eye-catching safety indication lamps ensure safe traveling.
The ventilating opening is functioned with effectively shutter protection, reducing the radiator damage.
Simple and Multifunctional Operation Panel
Read the operation information clearly and easily on the multifunctional LCD panel.
The lift cylinder is installed behind of the mast. This optimal design successfully widens both the mast’s width and driver’s vision.
Excellent All-round Visibility
Simple and clear operation panel ensures excellent all-round visibility for the driver.
Adjustable Steering Column
The inclination angle of steering column could be adjusted to give the driver the most comfort.
The cab is expanded due to the arc design of front/rear column. The driver will feel more comfortable in case of long-time operation.
The forklift has a lot more legroom.
Wide Entrance and Low Pedal
The wide entrance and low pedal make it easier to get on/off the forklift, especially in the case of busy operation.
Comfortable Suspended Seat
Appling the new type of suspended seat, adjust the bearing capacity according to the weight, and provide the most comfort. The moving range is as for as 150mm.
Foot Brake System
Step on the brake to stop the forklift and then unlock it by another step. It is very convenient and no need to change the sitting position.
Fingertip Control System (Optional)
Advanced intelligent fingertip control system, adjust the forklift specifications according to the driver’s stature and provide the most comfort. The working efficiency, as well as the energy use ratio is greatly improved.
87°Engine cover opening
Big engine cover opening leads to easy inspection and maintenance.
High Position Air Intake Device
The high position air intake system and the engine filter effectively prevent dust entering, and prolong the engine’s service life.